The EarFun Free 2S are compact true wireless earbuds with 7 mm composite drivers, a 4-mic array with ENC for calls, IPX7 waterproofing, wireless charging and up to 30 hours of playback with the case. The most common first-day problems with earbuds like these are earbuds that will not pair because the insulating film is still on, weak bass from the wrong ear tips, and taps that do something unexpected. The five steps below fix all three.
What you need
- The EarFun Free 2S earbuds and charging case
- The USB-C cable from the box, or any Qi wireless charging pad
- The three sizes of silicone ear tips (S, M, L) included in the box
- A phone with Bluetooth and, optionally, the free EarFun Audio app
Step 1: Remove the film and charge the case

New earbuds ship with a thin insulating film over the charging contacts. Peel it off both earbuds, otherwise they will not charge or pair. Put them back in the case and charge: about 2 hours by USB-C or 3.5 hours on a wireless charger (MagSafe magnetic charging is not supported). The earbuds themselves recharge in about 1.5 hours in the case, and EarFun says 10 minutes of charging gives about 2 hours of playback.
Step 2: First pairing with your phone

Put both earbuds in the case, close the lid, then open it again: the earbuds power on and enter pairing mode. Turn on Bluetooth on your phone, search for new devices and select EarFun Free 2S; if a password is requested, type 0000. After that, they reconnect automatically to the last device when you open the case. If they are on but not connected to anything, they switch off after 10 minutes to save battery.
Step 3: Pick the ear tips and get the fit

The box includes small, medium and large silicone ear tips, with the medium size fitted. Insert each bud and rotate it slightly so it sits in the concha of your ear. A proper seal matters more than anything else: if the bass sounds thin or the buds feel loose, try one size larger; if they press or hurt, go one size smaller. Your left and right ears can need different sizes.
Step 4: Touch controls you will use daily

Tap twice on either bud to play or pause music and to answer or end a call. One tap on the left lowers the volume, one tap on the right raises it. Three taps on the left go to the previous track, three on the right to the next one. Hold either bud for 2 seconds to reject a call, and hold the right bud for 2 seconds for the voice assistant. Touch the middle of the control zone; EarFun notes that very dry fingers can make taps less reliable.
Step 5: EarFun Audio app, game mode and reset

Install the EarFun Audio app to adjust the EQ, customise the controls and update the firmware. Game mode is enabled in the app; after that, holding the left bud for 2 seconds toggles it on and off. It lowers latency for games and videos but shortens the working range, so turn it off for music. If a bud stops connecting, put both in the case, keep the lid open and hold the case button for at least 8 seconds until both flash purple. Then delete EarFun Free 2S from your phone and pair again.
Tip: only one earbud plays?
EarFun’s FAQ suggests charging the case for 2 hours, cleaning the contacts in the case and on the buds with a cotton swab and a little alcohol, charging the buds for about 1.5 hours, then doing the 8-second reset. A blue flash when you drop a bud in the case confirms it is charging.

With the film off, the right tips and the taps memorised, the Free 2S are easy to live with: 7 hours per charge and 30 hours with the case, IPX7 protection against sweat and rain, Qualcomm-based Bluetooth 5.2 and a 4-mic ENC array for calls. At 47 g with the case, they disappear in a pocket, and the wireless charging case means a charging pad on the desk is all you need.
EarFun Free 2S True Wireless Earbuds (Black)
True wireless earbuds with 7 mm composite dynamic drivers, 4-mic array with ENC for calls, Bluetooth 5.2 (SBC), low-latency game mode, IPX7 waterproofing with SweatShield, touch controls with volume, EarFun Audio app, up to 7 hours per charge and 30 hours with the case, USB-C and wireless charging, 47 g with the case. Price on myearfun.com on November 21, 2026: $39.99 (regular $59.99), in stock.
FAQ
How do I pair the EarFun Free 2S?
Remove the insulating film, put both buds in the case, close it and open it again, then select EarFun Free 2S in your phone’s Bluetooth list (password 0000 if asked).
Do they have volume controls?
Yes. One tap on the left earbud lowers the volume and one tap on the right raises it.
Do they support wireless charging?
Yes, with any Qi charging pad (about 3.5 hours for the case). MagSafe magnetic charging is not supported.
Are they waterproof?
They are rated IPX7, so sweat and rain are not a problem.
How do I reset them?
Put both buds in the case, keep it open and hold the case button for at least 8 seconds until both flash purple, then pair again.
How much do they cost?
$39.99 on myearfun.com on November 21, 2026 (regular price $59.99), in stock.
