VEVOR Solder Fume Extractors and Helping Hands (2026): 9 Picks from 46,90 €, and the 510 m³/h Extractor That Costs 87 € Less Than the 380 m³/h One

Solder smoke is mostly flux fumes, and they go straight into your face when you lean over a board. A fume extractor pulls them through filters before they reach you; a helping-hands station holds the work so both hands stay free. We found seven VEVOR fume extractors and two helping-hands stations in stock on the EU store, from 46,90 € to 466,90 €, all with free shipping to Romania. The price ladder does not follow the airflow ladder. The strongest unit, rated 510 m³/h, costs 87,00 € less than a 380 m³/h one. An 85 W model costs 2,00 € more than the 100 W one next to it, which moves 20% more air. One selector on a single listing turns 111,90 € into 352,90 €. And one title understates its own airflow. We read every spec table, feature list and Q&A, and did the arithmetic ourselves.

Quick picks

All 9 at a glance

# Product Key figures Price € per m³/h
A helping hands with 3X LED magnifier (LFS0203) 4 arms 239 mm, 3X lamp 8 W, 5 colour temps 46,90 € –
B helping hands with 3X LED magnifier and 4 PCB holders (LFS0204) 4 arms 310/150 mm, 4 PCB pillars, 3X lamp 3 W 48,90 € –
C desktop fume extractor, 180 m³/h (DX50) 43 W, 180 m³/h, 3 stages, 3,35 kg 111,90 € 0,62
D fume extractor, 100 W, 240 m³/h (XF180U) 100 W, 240 m³/h, filter alert, 8,53 kg 189,90 € 0,79
E fume extractor, 85 W, 200 m³/h (XF180) 85 W, 200 m³/h, ≤70 dB, 8,1 kg 191,90 € 0,96
F fume extractor, 150 W, 280 m³/h (FL250) 150 W, 165 CFM (≈280 m³/h), 63 dB, filter alarm 287,90 € 1,03
G fume extractor, 145 W, 510 m³/h, remote (DX1002) 145 W, 510 m³/h, 10 speeds + remote, 15 kg 352,90 € 0,69
H fume extractor with 2 hoses, 275 W, 380 m³/h (DX2000) 275 W, 380 m³/h, 2 hoses, ≤68 dB, 19 kg 439,90 € 1,16
I fume extractor, 280 W, 459 m³/h, remote (DX2000II) 280 W, 459 m³/h, ≤64 dB, 23 kg 466,90 € 1,02

Power, airflow, noise, dimensions and weights are VEVOR’s figures from each listing. Prices are from the EU store; shipping to Romania is free on all nine. Euro per m³/h is our arithmetic on the rated airflow.

The traps

  • The strongest extractor costs 87,00 € less than a weaker one. G (DX1002) is rated 510 m³/h and costs 352,90 €. H (DX2000) is rated 380 m³/h and costs 439,90 € on a deal (regular 462,90 €); I (DX2000II) is rated 459 m³/h for 466,90 € (regular 491,90 €). G moves 34% more air than H for 87,00 € less, and is lighter: 15 kg against 19 and 23 kg. What the dearer two add: H has two hoses for two work spots, I is rated quieter (≤64 dB), and both list wheels, which the DX1002 listing does not mention. Motor watts do not predict airflow here: G gets 510 m³/h from 145 W, H gets 380 from 275 W. When the deals end on Dec. 1, the gaps grow to 110,00 € and 139,00 €.
  • The 200 m³/h model costs 2,00 € more than the 240 m³/h one. E (XF180, 85 W) is 191,90 €. D (XF180U, 100 W) is 189,90 €, has the same 265 mm square footprint, moves 20% more air and beeps when the filter needs changing. E is the one with a published noise rating (≤70 dB); otherwise D is the better buy.
  • One selector, 241,00 € apart. On the DX50 listing, the “Control method” option switches between C (membrane buttons, 111,90 €) and G (rotary control, 352,90 €). They are different machines: a 3,35 kg desktop box with 180 m³/h and a 15 kg cabinet with 510 m³/h, 2,83 times the airflow. Check the model number (DX50 or DX1002) before you pay.
  • A title that sells itself short. F (FL250, 287,90 €) says “106 CFM” in its title, which is about 180 m³/h. The spec table on the same page says 165 CFM and the description says 280 m³/h. Going by the spec table, it moves 40 m³/h more than D for 98,00 € more, and adds the only published filter area in the range (2,1 m² pleated, 99,91% at 0,3 µm) and the lowest noise figure in the range, 63 dB.
  • Helping hands: 2,00 € buys holders, not light. B (48,90 €) adds four magnetic PCB pillar holders and longer arms (310 mm and 150 mm against 239 mm). A (46,90 €) has the stronger lamp: 8 W and 5 colour temperatures against 3 W and 3. Pick B for boards, A for jewellery and fine work under the glass.
  • Hoses and filters are where the small print is. VEVOR says the 2 m hose on G is not self-supporting, so plan a clamp or stand. On H, VEVOR’s answer to a question about hose length gives only the cabinet size. On G, VEVOR advises replacing the pre-filter every 7 to 15 days and the main filter every 3 to 6 months, depending on use; C and G come with the filter installed and sell replacements separately.
VEVOR fume extractor DX2000 with two hoses, 380 m3/h, official VEVOR image
H: fume extractor with 2 hoses, 275 W, 380 m³/h (DX2000), 439,90 €.

Which one do you need?

Hobby soldering at a desk. C: small, 3,35 kg, 180 m³/h on three levels, and the lowest price per m³/h in the range. Its hose is short, so park it next to the iron.

A workshop bench with daily soldering. D: 240 m³/h, a 120 cm hose, casters and a filter alarm. Pick F if you want the 2,1 m² filter and the 63 dB rating.

Laser engraving, 3D printing, resin, heavy smoke. G: the most airflow, a remote and a HEPA–carbon–HEPA filter, for less than H or I.

Two workstations, one extractor. H is the only one here with two hoses.

Steadier hands at the iron. B for PCB work, A if you want more light.

All 9, by type

Helping hands with a magnifier (A and B)

Two magnetic third-hand stations on the same steel base, each with a 3X LED magnifying lamp powered over USB.

A. VEVOR helping hands with 3X LED magnifier (LFS0203)

46,90 €, free shipping. LFS0203: four 239 mm flexible magnetic arms on a 279 × 178 mm steel base with non-slip pads, plus a 3X magnifying LED lamp (8 W, USB, 5 colour temperatures and 10 brightness levels); no PCB pillar holders in this version; 2,5 kg with accessories.

B. VEVOR helping hands with 3X LED magnifier and 4 PCB holders (LFS0204)

48,90 €, free shipping. LFS0204: four flexible magnetic arms (310 mm long and 150 mm short) plus four magnetic PCB pillar holders on the same 279 × 178 mm steel base, and a 3X magnifying LED lamp (3 W, USB, 3 colour temperatures and 10 brightness levels); 2,1 kg with accessories.

VEVOR magnetic helping hands soldering station LFS0203 with 3X LED magnifying lamp, official VEVOR image
A: helping hands with 3X LED magnifier (LFS0203), 46,90 €.

Desktop: 180 m³/h (C)

The only unit that sits on the bench rather than the floor: 3,35 kg against 8 to 23 kg for the rest.

C. VEVOR desktop fume extractor, 180 m³/h (DX50)

111,90 €, free shipping. DX50: compact sheet-metal desktop unit, 205 × 188 × 225 mm and 3,35 kg on rubber feet, 43 W brushless motor, up to 180 m³/h on three airflow levels (membrane buttons), quartz cotton pre-filter plus H11 and activated-carbon 2-in-1 filter, 1.8 ft (about 55 cm) hose with a wide hood.

VEVOR desktop solder fume extractor DX50, 180 m3/h, official VEVOR image
C: desktop fume extractor, 180 m³/h (DX50), 111,90 €.

Compact floor units: 200 to 280 m³/h (D, E, F)

About 26,5 to 28 cm square on casters, three filter stages, one hose.

VEVOR solder fume extractor XF180U, 100 W, 240 m3/h, with hose and filters, official VEVOR image
D: fume extractor, 100 W, 240 m³/h (XF180U), 189,90 €.

D. VEVOR fume extractor, 100 W, 240 m³/h (XF180U)

189,90 €, free shipping. XF180U: 265 × 265 × 335 mm, 8,53 kg, 100 W motor, 240 m³/h, three filter layers rated 99,99%, a beep when the filter (rated 10,000 hours) needs replacing, 47.2-inch (120 cm) flexible hose, 4 swivel casters (2 lockable); VEVOR confirms the 220–240 V version in the Q&A.

E. VEVOR fume extractor, 85 W, 200 m³/h (XF180)

191,90 €, free shipping. XF180: 265 × 265 × 340 mm, 8,1 kg, 85 W brushless motor, 200 m³/h, three speeds, pre-filter cotton plus HEPA plus activated carbon, rated ≤70 dB, 360° rotatable exhaust pipe, 4 swivel casters (2 lockable).

F. VEVOR fume extractor, 150 W, 280 m³/h (FL250)

287,90 €, free shipping. FL250: 11 × 11 × 16.9 in (about 28 × 28 × 43 cm), 150 W DC brushless motor, 165 CFM in the spec table and 280 m³/h in the description, three speeds, cotton pre-filter plus pleated HEPA (2,1 m² of filter area, 99,91% at 0,3 µm) plus activated carbon, filter-block alarm, 63 dB, 1,2 m hose, four wheels (two lockable).

VEVOR fume extractor FL250, 150 W, official VEVOR image
F: fume extractor, 150 W, 280 m³/h (FL250), 287,90 €.

Big cabinets: 380 to 510 m³/h (G, H, I)

Four filter stages, 10 speeds, 15 to 23 kg. Built for laser engravers, 3D printers and long soldering sessions.

VEVOR fume extractor DX1002, 510 m3/h, with 4-stage filters, official VEVOR image
G: fume extractor, 145 W, 510 m³/h, remote (DX1002), 352,90 €.

G. VEVOR fume extractor, 145 W, 510 m³/h, remote (DX1002)

352,90 €, free shipping. DX1002: 438 × 246 × 473 mm sheet-metal cabinet, 15 kg, 145 W brushless motor, up to 510 m³/h (300 CFM), 10 speeds with a remote, cotton pre-filter plus a 3-in-1 HEPA, modified carbon and HEPA filter, clog alarm, 6.56 ft (2 m) hose that VEVOR says is not self-supporting; built for laser engraving and 3D printing.

H. VEVOR fume extractor with 2 hoses, 275 W, 380 m³/h (DX2000)

439,90 € (deal price to Dec. 1, regular 462,90 €), free shipping. DX2000: 405 × 305 × 440 mm, 19 kg, 275 W brushless motor, 380 m³/h, two hoses for two work spots at once, 10 levels on a stepless knob, pre-filter cotton plus two PP layers plus activated carbon, rated ≤68 dB, 4 wheels and carry handles.

I. VEVOR fume extractor, 280 W, 459 m³/h, remote (DX2000II)

466,90 € (deal price to Dec. 1, regular 491,90 €), free shipping. DX2000II: 425 × 315 × 520 mm, 23 kg, 280 W brushless motor, 459 m³/h, 10 speeds from the panel or an infrared remote, pre-filter cotton plus PP cotton plus two activated-carbon layers, sound-and-light filter alert, rated ≤64 dB, 4 wheels.

VEVOR fume extractor DX2000II, 459 m3/h, official VEVOR image
I: fume extractor, 280 W, 459 m³/h, remote (DX2000II), 466,90 €.

Who each one is for

Related on SiftGuide

The machines that make the most smoke: the laser engraver guide. A bench to put it all on: the workbench guide. Holding bigger parts: the bench vise guide. Cleaning flux off boards: the ultrasonic cleaner guide.

FAQ

How much airflow do I need?
For one soldering iron with the hood close to the joint, the 180 to 240 m³/h units are sized for the job. For laser engravers and 3D printers, look at the big cabinets; G is the one VEVOR describes as designed for laser engraving and 3D printing.

Does it vent outside?
They are filter units, not ducts to the outside: every listing describes pre-filter, HEPA or PP layers and activated carbon that clean the air drawn in through the hose. Keep the hood close to the work and change the filters on time.

Do they run on European sockets?
They are sold on the EU store with shipping to Romania; on the XF180U listing VEVOR confirms the 220–240 V version. The helping-hands lamps run from USB.

Sources

VEVOR EU store product pages, spec tables, feature lists, descriptions, questions and answers, prices, deal labels, stock and shipping to Romania for each product above; power, airflow, noise, dimensions and weights are VEVOR’s figures, price differences, airflow ratios and euro per m³/h are our arithmetic.