VEVOR Vegetable Cutter Buying Guide (2026): 17 French Fry Cutters, Dicers, Slicers and Commercial Food Processors from 55,90 €, and the Green Paint That Costs 18 €

A lever fry cutter turns a potato into even fries with one pull, and a disc cutter shreds carrots and cabbage faster than any knife. VEVOR’s EU store sells four kinds of vegetable cutters: lever fry cutters and dicers, serrated tomato slicers, rotary slicers with a thickness knob, and electric machines from a 200 W salad shooter to restaurant disc cutters. We compared the 17 that are well stocked and ship to Romania, from 55,90 € to 680,99 €, and found three places where you pay more for less.

All 17 at a glance

The traps

• The green paint costs 11 to 18 €. A and C are colour options on the same listing with the same 1/2″ and 3/8″ blades: stainless steel 62,90 €, green 73,90 €, 11,00 € more. With three blades the stainless version is 72,90 € and the green E 90,90 €: 18,00 € for the colour. We left the stainless three-blade out because only 13 were in stock; if it is back, buy it instead of E.
• One blade for 14 € less than four. B is the QTJ-J002 chopper with a single 3/8″ blade for 71,90 €. The same chopper with 1/2″, 3/8″, 1/4″ and a 6-wedge cutter plus a tray, D, is 85,90 €: 14,00 € more for three extra blades. Skip B.
• The juicer option costs 28 € more. On D’s listing, swapping the wedge cutter for a juicing plate (F) raises the price from 85,90 € to 113,90 €, 28,00 € more. Only worth it if you squeeze citrus every day.
• The floor stand costs 205,09 € delivered. O (JKC-300) and Q (HLC-300) are both 550 W disc vegetable cutters with two feed holes that slice 2 and 4 mm and shred 3, 4 and 7 mm. O comes with six discs (two of them 7 mm) and free shipping for 515,90 €; Q has five discs and a floor stand for 680,99 € plus 40,00 € shipping, 720,99 € delivered: 205,09 € more. Q also has the lowest rating here (3,71/5 from 17 reviews). A sturdy table does the stand’s job.
• The big chute is only 6 €. The electric slicers K (220 × 95 mm chute) and L (220 × 130 mm) have the same 120 W motor and 0–12 mm range; L is 6,00 € more and VEVOR says the wider chute takes cabbage and big potatoes. Take L.

Which kind do you need?

Fries at home: A. Pick 3/8″ for classic fries and 1/2″ for thick-cut. Hard sweet potatoes go through more easily after a minute in the microwave.

A snack bar or food truck: D for fries, dice and wedges, G for tomato and onion slices, and L for chips and cucumbers.

A restaurant kitchen: O slices and shreds carrots, cabbage and potatoes into a container; N or P chop onions, herbs and nuts in a bowl.

All 17, by type

French fry cutters and dicers (A–F)

Push the potato through a grid of blades with one pull of the lever: fries, carrot sticks, diced onions. Blade size is the stick width: 1/2″ is 12,7 mm (thick fries), 3/8″ is 9,5 mm (classic), 1/4″ is 6,4 mm (shoestring).

Tomato and vegetable slicers (G–H)

Serrated blades cut a whole tomato or onion into even slices in one push, without crushing it: for burger and sandwich lines.

Rotary slicers, 0 to 12 mm (I–L)

A spinning blade and a thickness knob: cucumbers, lemons, potato chips, cabbage. I and J are hand-cranked; K and L have a small motor and can still be turned by hand.

Electric shredders, bowl cutters and disc cutters (M–Q)

M is a small salad shooter for home. N and P chop in a bowl with an S-blade, like a big food processor. O and Q push vegetables through spinning discs and slice or shred into a container: the restaurant prep machine.

What we left out

A 1/4″ horizontal slicer and a three-blade lever fry cutter were marked almost sold out; a 1/4″ + 1/2″ tomato slicer and a three-blade horizontal slicer were down to their last three and two units; a 1/4″ chopper carried a clearance label; the electric fry cutter was out of stock; and the stainless three-blade LD fry cutter (72,90 €) had only 13 in stock. Replacement blades and meat cutters are not in this guide.

Who each one is for

• Home fries: VEVOR French fry cutter LD03, stainless, 1/2 + 3/8 inch blades (62,90 €).
• Fries, dice and wedges: VEVOR commercial vegetable chopper QTJ-J002, 4 blades incl. 6-wedge (85,90 €).
• Shoestring fries too: VEVOR French fry cutter LD02, green, 1/2 + 3/8 + 1/4 inch blades (90,90 €).
• Burger tomatoes and onions: VEVOR commercial tomato and vegetable slicer AY440-3, 3/8 inch (84,90 €).
• Thin tomato slices too: VEVOR commercial tomato slicer AY460-1, 3/8 + 3/16 inch (137,90 €).
• Cheapest adjustable slicer: VEVOR manual rotary slicer SL-p01, 0-12 mm, double feed ports (55,90 €).
• Adjustable slicer, stainless: VEVOR manual rotary slicer SL-02, stainless, 0-12 mm (85,90 €).
• Electric slicer, big chute: VEVOR electric slicer SL-08, 120 W, large feed port (157,90 €).
• Cheese and salad at home: VEVOR electric salad shooter MG-S1, 200 W, 5 attachments (57,90 €).
• Chopping in a bowl: VEVOR commercial food processor EFC-8L, 8 L bowl, 1100 W (431,99 €).
• Restaurant slicing and shredding: VEVOR JKC-300 electric vegetable cutter, 550 W, 6 discs (515,90 €).

Related on SiftGuide

Fries need a fryer: the VEVOR deep fryer guide. Ham, cheese and roast beef: the VEVOR meat slicer guide. Soups and sauces: the VEVOR immersion blender guide. Onions and peppers for the flat top: the VEVOR griddle guide.

FAQ

Which blade size for French fries?
3/8″ (9,5 mm) gives the classic restaurant fry, 1/2″ (12,7 mm) thick steak fries and 1/4″ (6,4 mm) thin shoestring fries.

Can a fry cutter dice onions?
Yes: push half an onion through the 3/8″ or 1/4″ grid, turn it 90 degrees and push again for dice.

Bowl cutter or disc cutter?
A bowl cutter (N, P) chops everything into small pieces, good for onions, herbs, nuts and sauces. A disc cutter (O, Q) makes even slices and shreds, good for salads, coleslaw and gratin.

Is shipping extra?
Only on Q (40 €). The other 16 ship free.

Sources

VEVOR EU store product pages, spec tables, feature lists, option prices, buy-box prices and reviews for each cutter above; models, blades, power and weights are VEVOR’s figures, differences are our arithmetic.