VEVOR Vinyl Cutter Buying Guide (2026): 305 mm Craft Cutters vs 28, 34 and 53 Inch Plotters, Feed vs Cut Width, Optical Eye, Euro Prices

A vinyl cutter (or cutting plotter) drives a small drag knife over a sheet or roll of vinyl to cut letters, logos and stickers; you then weed away the waste and apply the design, or press heat transfer vinyl onto a shirt. VEVOR sells two quite different kinds: 305 mm craft cutters that work from a phone or laptop with built-in design libraries, and sign-making plotters (375 mm to 1350 mm feed) that run SignMaster on a Windows PC. The numbers that matter are the real cutting width (always smaller than the feed width), whether the machine can read registration marks for print-and-cut stickers, and which computer it works with. We compared 11 VEVOR cutters that were in stock on the EU store on October 26, 2026, from 173,90 € to 388,90 €.

• The 11 cutters at a glance
• Feed width is not cut width
• Optical eye, edge detection or nothing
• Craft cutter or SignMaster plotter: which computer
• Paper, cardboard and thickness
• Read the listing twice
• Who each cutter is for
• Shipping, returns and warranty
• FAQ

The 11 VEVOR vinyl cutters at a glance

Three listings showed a time-limited deal (“Deal ends Oct 31”). Several pages also offer bigger sizes of the same machine at a higher price (listed under each pick). We left out a heat press + 28 in cutter bundle at 479,90 €: its page showed “10,00 € Shipping Fees” instead of free shipping and lists “Rated Voltage: 110V” (Europe uses 230 V), and it says “Not compatible with the Mac system.” We also left out star ratings, which are not specific enough to compare models.

Feed width is not cut width

Plotters are sold by feed width (how wide a roll fits between the pinch rollers), but the knife can only travel part of that. On VEVOR’s own spec lists the gap is 90 mm on the 375, 720, 870 and 1350 mm machines (285, 630, 780 and 1260 mm cut) and 120 mm on the two edge-detection models (450 mm feed and 330 mm cut; 720 mm feed and 600 mm cut), all our arithmetic. On the KH-720A, VEVOR went further in a Q&A answer on June 28, 2026: “The maximum cutting width for this machine is 720-105 = 615 mm; the 105 mm represents the width of the carriage.” Its spec list says 630 mm.

Rule of thumb (ours): if your largest design is about 60 cm wide, a “28 inch” (720 mm) plotter is the minimum, and the 600–615 mm figures above suggest checking with VEVOR first. The cut length is not the limit on roll machines: for the KH-375A, VEVOR says “The cutting length is unlimited, the material width can be less than 375mm, and the size of A3A4 can be cut.”

Per metre of cutting width, the 53 in KI-1350A works out at about 308,65 € per metre of cut width versus 317,30 € for the basic 28 in plotter (our arithmetic), so the big one is not expensive for its size; it just needs the space and the work.

Optical eye, edge detection or nothing

For print-and-cut stickers (you print a design with registration marks, then the cutter cuts around it) the cutter has to find the marks. The listings differ a lot here:

• No mark reading: asked whether the basic 28 in plotter reads registration marks (“contour cutting”), VEVOR answered: “No, this one doesn’t support it.” Asked (in Portuguese) whether the 53 in model has a reader for cutting around printed material, VEVOR answered “Olá não.” (“Hello, no.”, our translation). The 34 in basic plotter lists “Positioning: Manual”.
• Manual contour: the SK-720L with Bluetooth lists “Contour Type: Manual Contour”, even though its summary mentions contour cutting.
• Optical eye: the KH-375A and KH-720A have a built-in optical eye that VEVOR says “will semi-automatically and accurately scan all kinds of marks”.
• Automatic edge detection: the TT-450 and EH-720TS say they are “Equipped with excellent automatic edge detection”; the dual-blade SK-720L lists “contour detection”.

The optical-eye KH-720A costs 78,00 € more than the basic 28 in plotter (our arithmetic), and that is roughly the price of being able to cut printed stickers instead of only plain vinyl lettering.

Craft cutter or SignMaster plotter: which computer

• 305 mm craft cutters (smart2, smart4): the listings say they work with “Mac, Windows, Android 5.1 and higher, and iOS 11.0 and higher” and connect “via a USB cable, Bluetooth, or direct access to a USB drive”. They import PNG, JPG, SVG and TIF, “cut, write/draw, and score”, and come with design software and a built-in design library, so there is no SignMaster licence to manage. The machine runs from a 48 W adapter.
• SignMaster plotters (KH, KZJ, KI series): these list Windows (“Our product software supports all Windows systems.”) and connect by USB and a COM (serial) port. The included SignMaster is activated with a licence key; when a buyer lost the old computer, VEVOR said to “contact SignMaster (Future Corporation) support and provide your PSN/license key” to reset or transfer it. Keep that key safe. The basic 28 in plotter also works with CorelDRAW according to VEVOR, the EH-720TS with SignCut, and the Bluetooth SK-720L lists Signmaster, Signcut, ARTCUT, Graph-Cut and Coreldraw.
• Mac users: among the plotters, only the dual-blade SK-720L lists “Windows 7-11 and macOS”. The Bluetooth SK-720L pairs with an Android app but its PC software list is Windows XP to 11.

Paper, cardboard and thickness

The plotters are built for self-adhesive vinyl and transfer film on a roll. On the KH-375A, VEVOR answered: “It cannot cut cardboard. For cutting paper, it is recommended to use a cutting mat.” On the basic 28 in plotter, the maximum material thickness is “1mm.” (Q&A), and the edge-detection models list “≤0.04" / 1mm”. The KH-375A and KH-720A spec lists say “Max Cutting Thickness: 0.12 in / 3 mm”, but see the KH-720A paper answer below; for card making and paper crafts, the 305 mm craft cutters (which also score and draw) are the more natural fit (our suggestion).

Read the listing twice

Who each cutter is for

VEVOR 305 mm craft cutter, button-controlled (smart2): 173,90 €

For: home crafters with a Mac, iPad or phone: 305 mm cutting path, cut, draw and score, USB, Bluetooth or USB drive, PNG/JPG/SVG/TIF, built-in designs. A “Set” version was listed at 226,90 €, 53,00 € more (our arithmetic). Skip if: you want to cut long banners or wide signs; this is a desktop craft machine.

VEVOR 28 in vinyl cutter plotter with stand (basic): 199,90 €

For: the cheapest way to cut vinyl lettering and car decals on a roll: 720 mm feed, 630 mm cut, 10–500 g force, 10–800 mm/s, floor stand, SignMaster, 13.5 kg; VEVOR says it is 95 W and works with CorelDRAW. Deal price, was 276,90 € (deal ends October 31). Skip if: you want print-and-cut stickers; VEVOR says it does not read registration marks.

VEVOR SK-720L 28 in cutter with Bluetooth: 222,90 €

For: sending jobs from an Android phone as well as a Windows PC: USB, COM and Bluetooth, PLT/EPS/SVG/DXF/AI, 720 mm feed and 630 mm cut, comes with a 300 x 60 cm vinyl roll, 13.5 kg. An 870 mm version was listed at 335,90 €. Skip if: you need automatic mark reading; the spec says “Manual Contour”.

VEVOR KH-375A desktop cutter with optical eye: 226,90 €

For: small stickers and labels on a desk: 375 mm feed, 285 mm cut, optical eye, 9.2 kg, Windows (VEVOR says Windows 11 works), and it ships with 5 vinyl sheets and a cutting mat. The same listing offers 720 mm (277,90 €), 870 mm (330,90 €) and 1350 mm (396,90 €) sizes. Skip if: you want to cut cardboard; VEVOR says it cannot.

VEVOR TT-450 cutter with automatic edge detection: 229,90 €

For: a compact roll cutter with edge detection: 450 mm feed slot, 330 mm cut, up to 1 mm, 10 blade pressure levels, 20–400 mm/s, 16M memory, USB or U-disk; VEVOR says it takes SVG, EPS, PLT and AI files from a USB stick (answer in Bulgarian, our translation). Skip if: you need more than 330 mm of cut width; the EH-720TS gives 600 mm for 122,00 € more (our arithmetic).

VEVOR 305 mm craft cutter, touchscreen (smart4): 253,90 €

For: the same 305 mm craft workflow as the smart2 with a separate touchscreen control panel. Skip if: buttons are fine for you; the touchscreen costs 80,00 € more than the smart2 (our arithmetic).

VEVOR KH-720A 28 in cutter with optical eye and stand: 277,90 €

For: print-and-cut stickers up to about 60 cm wide on a budget: optical eye, 720 mm feed, 630 mm cut in the spec (615 mm per VEVOR’s answer), 19.7 kg with stand, Windows. Skip if: you planned to cut paper; VEVOR’s answer says it cannot, despite the description.

VEVOR 34 in vinyl cutter plotter with stand (basic): 304,90 €

For: wider vinyl lettering and signs: 870 mm feed, 780 mm cut, SignMaster, USB, manual positioning. 105,00 € more than the 28 in basic plotter for 150 mm more cut width (our arithmetic). Skip if: you need mark reading, or cannot confirm the 60 Hz voltage line with VEVOR.

VEVOR SK-720L dual-blade cutter with stand: 329,90 €

For: Mac users who want a plotter, and jobs that cut and score in one pass: Windows 7–11 and macOS, two blades, contour detection, up to 1 mm, 95 W, 15.9 kg including the stand. Deal price, was 365,90 €; 870 mm (356,90 €) and 1350 mm (676,90 €) sizes were listed. Skip if: you only cut plain vinyl on Windows; the basic 28 in plotter is 130,00 € cheaper (our arithmetic).

VEVOR EH-720TS cutter with automatic edge detection: 351,90 €

For: wider print-and-cut work with edge detection: 720 mm feed, 600 mm cut, up to 1 mm, 16M memory, USB, and VEVOR says it works with SignCut. Skip if: you need the full 630 mm the other 28 in machines list.

VEVOR KI-1350A 53 in vinyl cutter plotter: 388,90 €

For: shop signs and banners: 1350 mm feed, 1260 mm cut, Roland-compatible blades. Skip if: you hoped to print or cut PDFs; VEVOR says “The machine can only cut but not print. It does not support PDF files and can only cut vector images.” It also has no contour reader.

Shipping, returns and warranty

• Shipping: each linked product page said “FREE Shipping Excludes remote areas.” and “Get it Thur. Oct. 29 – Tues. Nov. 3” for Ireland on October 26, 2026. The shipping policy says “All products are currently free shipping, except in some remote areas.” and lists 2-6 business days of delivery, with more time for heavy and big-size products.
• Returns and warranty: “All our products come with a 12-months warranty and can be returned for free within 30 days of delivery for approved reasons!” On the Bluetooth SK-720L page, a buyer asked about the EU two-year legal warranty and VEVOR answered on February 9, 2025: “The product warranty period on the European website is two years.” Ask for the term in writing.

Related on SiftGuide

Cutting heat transfer vinyl for shirts? Our VEVOR heat press buying guide compares eight presses from the same EU store. More VEVOR guides: the ultrasonic cleaner buying guide and the meat grinder buying guide. Also new: the VEVOR pottery wheel buying guide (mini vs full-size, wheel head size, clay capacity and lift legs).

FAQ

Which VEVOR vinyl cutter is cheapest?
Of the 11 in stock, the 305 mm smart2 craft cutter at 173,90 € on the EU store (October 26, 2026, delivery set to Ireland). The cheapest roll plotter was the basic 28 in model at 199,90 € (deal price, was 276,90 €).

How wide can a 28 inch VEVOR plotter actually cut?
The 720 mm (28 in) models list 630 mm of cutting width; the edge-detection EH-720TS lists 600 mm, and for the KH-720A VEVOR answered 615 mm because of the 105 mm carriage.

Can VEVOR vinyl cutters cut printed stickers?
Only models that read registration marks. VEVOR says the basic 28 in and the 53 in plotters do not; the KH-375A and KH-720A have an optical eye, the TT-450 and EH-720TS automatic edge detection.

Do VEVOR vinyl cutters work with a Mac?
The 305 mm craft cutters list Mac, Windows, Android and iOS. Among the plotters, only the dual-blade SK-720L lists macOS; the others list Windows and SignMaster.

Can a VEVOR plotter cut cardboard or paper?
VEVOR says the KH-375A cannot cut cardboard and recommends a cutting mat for paper, and says the KH-720A cannot cut paper. The roll plotters are made for adhesive vinyl up to about 1 mm.

Does VEVOR ship these outside Europe?
The links here go to eur.vevor.com, the European store, which prices in euros and ships within Europe (remote areas excluded from free shipping). Outside Europe, use VEVOR’s store for your country.

Sources: VEVOR EU product pages, spec lists and Q&A for the smart2 and smart4 305 mm cutters, the TT-450, EH-720TS, KH-375A, KH-720A, SK-720L (Bluetooth and dual-blade), the basic 28 in and 34 in plotters, the KI-1350A and the heat press + cutter bundle; VEVOR EU Shipping Policy and Return & Refund Policy; all checked October 26, 2026. Product images are VEVOR’s official images.